Scanning Moisture Meter 850002
Comes ready to use with clear instructions and 3 "AAA" batteries. Accurately reads elevated moisture content using cutting edge electromagnetic wave technology that penetrates 1/4" through most materials. Non-destructive leaving no marks and automatically calibrates to dry air. The probe can be held at any angle and reads 0 to 100% moisture in wood and drywall for building inspection, lumber, water damage repair, and other industries. The large LCD simultaneously displays current, maximum and minimum moisture content, has a bright back light and a low battery indicator. Features adjustable audible and visible, Hi/Lo wetness risk alarm, auto-power-off and a hold function.
Dim: 9 1/2" x 2 1/2" x 1" (242 x 63 x 30 mm)
Weight: 8 oz. (226 g)
All soft and hard woods including but not limited to Pine, Poplar, Oak, Maple, and Teak.
All forms of drywall and sheet rock including cement board, ¼” and ½” gypsum drywall, soundboard, and green board.
NOTE: This meter is not appropriate for testing concrete, brick, mortar, or screed
|Operating Temperature and Humidity||
0 - 40°C
|Reading Depth Range||
6 - 40 mm
AAA,1.5V battery x 3
200 hours without backlight