THANKS FOR SHOPPING WITH US TODAY!!
Cart 0
Model 10 Event Recorder (1 Stylus) 115VAC, 60H

Model 10 Event Recorder (1 Stylus) 115VAC, 60H

$ 445.00

Features

  • Evaluate men and machines by charting production and lost time
  • Totalizers Optional
  • Resettable Piece Counters Optional
  • Time Delay Optional

The "Event Recorder" is tamperproof - simple to install - easy to read - moderately priced - available with time totalizer, resettable piece counter and time delay.

This specially-designed device records electronically, through one or two stylus, the complete picture of running and down time on any machine. It tells you exactly when you produce, when you don't and through the write-in window, the reasons for stopper can be written on the chart.

Operation: The Event Recorder is connected to your machine so it can differentiate between "productive" and "down" time. If the machine runs only when actually "productive", wire it through the starting switch. If the machine runs continuously, use a limit switch at an appropriate place (should you want more information on connections, contact us, mentioning the type and make of machine involved).

Specifications: The Event Recorder is a package unit. It comes with its own power line and a load cord(s) to connect to your equipment. All leads extend through strain-relief bushings; cannot be "accidentally" disconnected.

Installation: Plug power line into receptacle (110V or 220V as indicated on nameplate). This line must feed current to the Recorder uninterruptedly. Connect "load" (machine) cord into your equipment or limit switch, depending upon method of connection. The Recorder will now begin charting, on the disc, the operational record. (Need more specific information? Send for connection bulletin). Also 12 or 24 VDC available.

Reading: Charts are divided into minutes and hours. The stylus draws a continuous line, "outside" for production, "inside" for down time. This continuous line provides one distinct advantage. Even a momentary interruption is indicated by a "zig". If this "zig" represents only a second or so, you cant measure it but you know a brief interruption occurred.
The two stylus model draws concentric lines, on one chart, for 2 or 3 machines (or 2 or 3 functions on one machine) or generally, to record actually machine running versus "productive" and "down" time.

Recording Periods: Three chart speeds are available - 8 hour, 12 hour and 24 hour. Charts are not included with the instruments. Specify recording time when placing order, and order appropriate charts.

Power Supply: Available for 120VAC 60 Hz, and 220VAC 60 Hz (included in price). If required, we can supply with 12 VDC or 24 VDC. On special order, we can supply power supplies of 120VAC 50 Hz or 220 VAC 50 Hz. Delivery and prices will be advised on special ordered power supplies, contact us.

Optional Features: Low Voltage - The Event Recorder can be equipped to accept a low voltage impulse. Additional cost based on voltage modifications needed; contact RWC Testing & Lab Supplies for cost.

Totalizer - registers accumulative productive time. Actually a built-in running time-meter for total productive time. Double stylus models have 2 totalizers, one for each stylus. Will go up to 100,000 hours, then resets automatically. Contact RWC Testing & Lab Supplies for cost on the totalizers.

Dimensions: 8"W x 10"L x 4"D

Weight: Approximately 8 lbs.

 


Share this Product