|
|||||||||||||||||||||||||||||||
A2108 Tachometer with Analog Output
|
|
3 Models A2108: Basic Model with Voltmeter Plugs A2108-LSR: Adds laser light source and BNC cable A2108-LSR-RS232: Laser light source & RS232 output |
The A2108 Non-Contact tachometer converts RPM into an analog (voltage) output signal allowing you to use any digital multimeter, data acquisition system or voltage recorder as an RPM display. Optional contact adapter allows you to measure contact RPM or surface speed.
The voltage output on the A2108-LSR analogue output version provides 1 mv/rev = 6 vdc @ 6,000 rpm.
The A2108-LSR-232 version provides direct serial data output to your PC, a serial cable and a CD with logging software is supplied with this model.
The A2108-LSR version is switched On manually, using the continuous mode feature option. Option provided continuous measurement is taking place the Probe will remain in the On mode. An auto off feature provides shutdown if no activity is logged for 1 minute.
The A2108 comes supplied in a custom carrying case with AAA batteries, instruction manual, calibration certificate & reflective tape (3 pcs, 3" x 1").
A2108 is supplied with a cable terminating in a BNC connector.
The A2108-LSR is also supplied with RS232 output cable and software CD.
Specifications
| Range: |
Range 1: 100 - 6,000 RPM Range 2: 1,000 - 60,000 RPM A2108-LSR-RS232: 100 - 60,000 RPM Continuous |
| Resolution: |
A2108/A2108-LSR: ± 1.5mV A2108-LSR-RS232: ± 1 rpm |
| Accuracy: |
A2108/A2108-LSR: ±0.5% A2108-LSR-RS232: ± 0.1% |
| Light Source: |
A2108: Tungsten Filament A2108-LSR / A2108-LSR-RS232: Laser Class II 635nm |
| Optical Range: |
A2108: 50 - 1000 mm A2108-LSR / A2108-LSR-RS232: Up to 2m (6 ft) |
| Optical Angle: |
A2108: ± 45° A2108-LSR / A2108-LSR-RS232: ± 80° |
| Range Select: |
Up Arrow = I Down Arrow = II |
| Carry Case: | Included |
| Contact Adapter: | Optional |
| Voltage Output: | -6 vdc both ranges |
| On Target Indicator: | Green LED |
| Power: | 4 x AAA batteries - supplied |
| Connections: |
A2108: Coiled cable with 2 x 4
mm plugs fitted A2108-LSR: Binder connector + 1 m cable A2108-LSR-RS232: 1m Cable + Serial plug |
| Mounting (A2108-LSR/A2108-LSR-RS232) | Camera bush fitted |
| Update Time (A2108-LSR) | Time of one rev or 1 millisecond |
| Zero Offset (A2108-LSR) | Max. 6 mV Analogue version |
| Controls (A2108-LSR) | 2 x press to measure buttons One continuous mode button |
| Capture Mode (A2108-LSR-RS232) | 0.1 sec |
| Controls: | On, Invert, Capture, Ratio (A2108-LSR-RS232) |
| Item | Description |
Price |
| A2108 | A2108 Tachometer with Analog Output |
$189.00 |
| A2108-LSR | Advent Laser Tachometer with DA Output |
289.00 |
| A2100/01 | Contact Adapter |
79.00 |
| 205T | Reflective Tape (1" x 7") |
5.00 |
| 205TS | Reflective Tab Sheet 35 1/2" x 1/2" |
5.00 |
| DT-TRI-HD | Tripod for Tachometer and Stroboscopes |
35.00 |
| BATT-RC4AA-WC | 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit |
35.00 |
Search | Contact | Another Link
