|
|||||||||||||||||||||||||||||||
Model 600 Oxygen Analyzer for Air and Water
|
|
With a unique galvanic sensor,
the Model 600 Oxygen Analyzer is able to measure both the percent
concentration of oxygen in air as well as the parts per mission (PPM or
Mg/L) dissolved oxygen in water. It has a range of 0 to 100.0%
concentration and 0 to 100.0 parts per million dissolved oxygen. The galvanic sensor is totally sealed, requiring no maintenance such as membrane and filling solution changes. The typical life of the sensor is greater than 12 months. The sensor is temperature compensated to maintain accuracy for air calibration. The sensor's flow rate sensitivity requires only a 0.5 ft/second flow in water for accurate readings. The sensor can safely withstand 25 psi pressure (60 foot depth in water). |
This meter is very easy to operate, designed with the non-technical user in mind. The Model 600 is sold in a kit, complete with the meter, the standard sensor with a five foot cable length and instructions. Custom cable lengths are available for the sensor.
The Sensor Extender Kit is an optional accessory that is used with the Model 600. With proper storage in an oxygen-free environment, the life of the sensor (electrode) can be prolonged. The oxygen electrode is manufactured with a lead anode and a gold cathode.
Specifications
| Range: |
Dissolved Oxygen: 0-100.0 PPM Concentration in air: 0-100% |
| Accuracy: |
DO, ±0.25 ppm Air, ±1% |
| Precision: | ± 0.1% |
| Hysteresis: | Non-existent |
| Response Time: | 90% of final reading in 30 seconds |
| Zero: | True zero in the absence of oxygen |
| Pressure: | 25 psi maximum, 60 ft. depth in water |
| Warranty: |
Meter: 2 Years Sensor: 6 months |
|
Controls: Switch: |
OFF - % - PPM |
|
Miscellaneous: Display: Power: Size: |
1/2" LCD 9-volt battery (Optional accessory: AC wall adapter Meter: 6.00"L x 1.55"W x 3.70"H Sensor: 1.25" dia. x 1.62" length - 5 foot cable length |
| Item | Model/Description |
Price |
| 01-OXAN | Model 600 Oxygen Analyzer with 5 ft. cable length |
$588.00 |
| 01-OXANELEC-05 | Replacement Electrode for Model 600 with 5 foot cable |
136.00 |
| 01-OXAN-EXTEND | Oxan Extender Kit: Storage chamber for the oxygen sensor for Model 600. Used to increase electrode life by limiting oxygen exposure. |
75.00 |
| 01-36-2000 | Replacement 1 ounce bottle of sodium bisulfate used with the Oxan Extender Kit. |
16.00 |
| 01-WINKLER | Wet chemistry method to determine the amount of oxygen in water. The Winkler Kit is also used to calibrate the oxygen electrode (OXAN-600) to the oxygen meter. |
73.00 |
| 01-ACADAPTER | A KIT: 3.5mm jack will be installed in any battery operated instrument and a 120 volt AC to 6 volt DC adapter will be supplied. (Must be ordered with instrument) |
36.00 |
| 01-JACK | A 3.5mm jack can be installed in a meter during manufacture or a meter can be returned for installation. |
23.00 |
| 01-RECORDER | A 2.5 mm jack can be installed for recorder output. (Must be ordered with instrument) |
23.00 |
Search | Contact | Another Link
